Steeldart. Warum? Darum!

 

 

 Flächenvergleich

                                               Double Treble Bull Bullseye
Unicorn Eclipse Pro ¹ 470 mm² 286 mm² 629 mm² 121 mm²
MasterDarts Future 1 ¹ 482 mm² 285 mm² 667 mm² 165 mm²
Bull's Advantage II ¹ 461 mm² 280 mm² 618 mm² 127 mm²
Winmau Blade III ¹² 403 mm² 245 mm² 593 mm² 127 mm²
Winmau Pro SFB ³ 394 mm² 235 mm² 551 mm² 127 mm²
Eclipse Pro Trainer ¹ 324 mm² 201 mm² 497 mm² 79 mm²

 

Berechnet mit AutoSketch 7


Inside 8,0 (Apex 9,6)

 

  D T B BE
 Unicorn Eclipse Pro ¹ 9,2 (10,1) 9,2 (10,1) 32,8 12,4
 MasterDarts Future 1 ¹ 9,5 (10,6) 9,3 (10,4) 33,0 14,5
 Bull's Advantage II ¹ 8,9 (9,6) 8,9 (9,6) 31,8 12,7
 Winmau Blade III ¹² 8,1 8,0 32,0 12,7
 Winmau Pro SFB ³ 8,0 8,0 32,0 12,7

 

Wire/Strip

                                               DT S B BE
 Unicorn Eclipse Pro ¹ 0,9 mm 0,8 mm 1,1 mm 1,8 mm
 MasterDarts Future 1 ¹ 1,1 mm 1,1 mm 1,2 mm 0,6 mm
 Bull's Advantage II ¹ 0,7 mm 0,6 mm 0,6 mm 0,8 mm
 Winmau Blade III ¹² 1,7 mm 1,2 mm 1,6 mm 1,6 mm
 Winmau Pro SFB ³ 1,7 mm 1,7 mm 1,4 mm 1,6 mm

 


have segmental material comprising:

Wire types can be round, triangular or diamond-shaped in section maximum 1.85mm or 1.27mm minimum. (±0.2mm) Inner and outer bull rings, if not made of wire, to have a wall thickness not greater than 1.6mm ± 0.2 mm and to have sharpened edges.
Strip materials should not be greater than 1.85 mm in wall thickness and have a sharpened edge to form an apex.
All segmental materials shall either be affixed to the face of the board in  such a manner that they lie flat on the face of the dartboard or alternatively strip materials be embedded into the surface of the board.

have the following dimensions:

Double and Treble dimensions to be, for conventional wire boards, measured inside to inside = 8.0mm ± 0.2mm for boards manufactured with strip material measured apex to apex = 9.6mm ± 0.2mm

 

 

    ©Solid-Darts 2014